Gypcrete

Gypcrete

A 1.5-inch slab of gypsum concrete weighs 13 pounds per square foot versus 18 pounds per square foot for regular concrete. Even though gypsum concrete weighs less, it still has the same compressive strength as regular concrete, based on its application as underlayment or top coat flooring.

What's the difference between gypcrete and concrete?

Gypcrete is a cousin to concrete and made of a lightweight sand mixture that makes it much lighter than concrete, though less durable. Only certain types of flooring can be laid over the top of a Gypcrete subfloor, which is laid down over a wood subfloor.

How thick can you pour gypcrete?

The typical maximum depth of Gyp‑Crete is 3" (76 mm). for depths greater than 3" (76 mm), contact an authorized dealer.

What can I use instead of gypcrete?

Pourable gypsum based cementitious material can be applied over tubing radiant stapled to a subfloor by licensed applicators. In contrast, Thermalboard is easy to install, cost effective, and suitable for all flooring goods.

Is Gypcrete cheaper than concrete?

However, concrete is surely a cheaper option for covering large areas due to the ease of installation and availability of ingredients. Gypcrete is less expensive than pouring an entirely new concrete slab for covering small areas.

Can you walk on Gypcrete?

A: Depending on the humidity and temperature, Gypsum Concrete can be walked on in 3-4 hours. We ask that you keep other trades off of the Gypsum Concrete for 24 hours. Q: Do I need to provide heat or fans after the pour? A: Depending on the season, temporary heat and/or ventilation may be required.

How thin can Gypcrete be poured?

Minimum Thicknesses: The minimum pour thickness over wood framed floors is ¾” thick. In some cases the pour thickness can be reduced to ½” thick if reinforcement is used. Weight Considerations: Gypsum Concrete weighs approximately 6.5-7.5 lb/sf at ¾” thick and 13-15 lb/sf at 1-1/2” thick.

Can you tile over Gypcrete?

Tile and dimensional stone can be installed over Gyp-Crete 2000 in areas designated as interior, dry, and above grade floors for residential and light commercial traffic.

Can Gypcrete be used as a finished floor?

Gypsum can't be used as a finished floor, but it can serve as an underlayment for a variety of other floor coverings.

Does gypcrete need to be sealed?

Controlling the dust When used under floating floors, Gyp-Crete does not need to be sealed or primed asthere is no off-gassing of VOCs, and no adhesive is required. However, you should stillexercise caution if you plan on walking on the Gyp-Crete before you put flooring over it.

How soon can you walk on gypcrete?

It sets up quickly and can be walked on after 90 minutes – allowing other light sub-trades to begin work the next day. Gypsum concrete is considered a “green” building material, and also meets the stringent volatile organic compound (VOC) requirements of GREENGUARD Gold Certification.

Can gypcrete be used outside?

Lightweight Concrete can be applied on exterior and interior surfaces. The most popular product for interior surfaces is LightWeight Gypsum Concrete (GypCrete). For Exterior surfaces, such as decks, balconies, or roof pads, cement-based Lightweight Concrete is the best choice!

How heavy is gypcrete?

With an average weight of seven pounds per square foot for a ¾” thickness pour, Gypsum Concrete application (GypCrete) gives contractors the ability to pour floor underlayment in buildings and areas where they couldn't before due to weight restriction.

What is gypcrete topping?

Gypcrete is essentially a combination of sand, Portland cement, and gypsum, and it is commonly used for floor underlayment, as well as sound insulation. The gypcrete mix also has an important role in fire control, which is precisely why many people gravitate towards this option.

How thick is radiant floor heating?

The industry standard for radiant heat tubing is 5/8” Pex tubing (O.D. of approx ¾”), therefore a 1-1/2” thick Gypsum Concrete topping is most typical.

How long does it take for gypcrete to dry?

For both methods, the underlayment is considered dry if there is no discoloration (darkening) of the underlayment or condensation on the test covering after 16 hours.

Can you pour gypcrete over concrete?

The gypsum underlayment is designed to pour over tubing, encasing the tubes in crack resistant, noncombustible gypsum, acting as the thermal mass. Therma-Floor systems can be used in many different situations, because it can be installed on top of subfloors and concrete slabs, whether existing or new.

Is gypcrete sound proof?

A sound absorbent material, such as rubber matting, gypsum concrete "gypcrete", or a layer of homasote – will reduce airborne and impact noise transmission into the space below. All of the underlying layers must be continuous under partitions and caulked at the edges.

Can you nail into gypcrete?

As gypcrete is more brittle and has lower compressive strength, it won't hold the nail at all.

Where do you use gypcrete?

What is Gyp-Crete used for? Gypcrete is a building material used as a floor underlayment. It is commonly used in wood-frame and concrete construction forsound reduction, fire ratings, radiant heating, and floor leveling.

12 Gypcrete Images