Metric Socket Sizes
Metric socket sizes
What are the standard socket sizes in order?
Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
Are 3/4 and 19mm the same?
19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.
What are the standard SAE socket sizes?
Metric and Standard (SAE) sockets come in three available drive sizes: 1/4 inch, 3/8 inch, and 1/2 inch. The measurement refers to the size of the square used to attach the to socket to a wrench or a ratchet.
Why is there no 16mm wrench?
16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don't find them in most basic wrench / socket sets.
What size is a 7/8 socket in metric?
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2" | 19mm | 3/4" |
| 9/16" | 21mm | 13/16" |
| 22mm | 7/8" | |
| 5/8" | 24mm | 15/16" |
Can I use a metric sockets on standard bolts?
Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
What is equivalent to 22mm socket?
| BOLT DIAMETER | STANDARD | METRIC |
|---|---|---|
| - | 7/8" | 22mm |
| 5/8" | 15/16" | 24mm |
| - | 1" | 25mm |
| 3/4" | 1-1/8" | 29mm |
What is a 10mm socket in standard?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
Can I use a 3/4 socket instead of a 19mm?
No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.
Is 21mm the same as 13 16?
Indeed. A 13/16 is just under 21mm.
What is 18mm in standard?
| SAE | Metric | Inch |
|---|---|---|
| 18mm | 0.709 | |
| 23/32" | 0.719 | |
| 19mm | 0.748 | |
| 3/4" | 0.75 |
Is SAE imperial or metric?
There are two different methods for measuring the hex sizes of sockets. The SAE (Society of Automotive Engineers) system uses inches, and the imperial or metric system uses millimeters.
What does SAE stand for measurement?
Today, measuring in feet and inches is part of the Standard American English (SAE) or Imperial units of measurement, along with volumes like gallons and fluid ounces and weights like pounds. It's standard in the United States and two other countries in the world.
Does SAE mean standard?
SAE, or standard, is used on most domestic models, while metric applies to foreign or non-domestic vehicles. Socket sets and wrench sets are among the most used tools in cases where size measuring differences are important. Notably, SAE tools are measured in fractions of inches, from 5/32 to 2 ½ inches.
Do they make a 20mm socket?
Kobalt Metric 1/2-in Drive 20mm 6-Point Impact Socket in the Impact Sockets & Impact Socket Sets department at Lowes.com.
Is there a 16 metric wrench?
World famous Park Tool quality wrapped up in a combination metric wrench. Features an open end and a 12-point box end with a 72 tooth, two-way ratcheting mechanism.
What size is a 16 mm socket?
A: Wex, the diameter of this socket is 0.95 inches.
What does 7/8 convert to in MM?
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.875” | 7/8” | 22.23 mm |
| 0.938” | 15/16” | 23.83 mm |
| 1” | 1” | 2.54 cm |
| 2” | 2” | 5.08 cm |
Is 10mm the same as 3 8?
A 10mm thread has an outside diameter of 10mm. A 3/8 inch British Standard Pipe (BSP) thread has an outside diameter of 16.662mm, or a little less than 2/3 inch.
Post a Comment for "Metric Socket Sizes"