74ls04
74ls04
74LS04 is a 2 input quadruple 8-bit NOT gate IC. Inverter in logic converters is an electronics device whose basic functions are to invert the incoming logic weather it is HIGH or LOW. They are also known as NOT gates.
What is the difference between IC 74LS04 and IC 74HC04?
III 74LS04 VS. 74HC04 is a hex inverter of CMOS circuit, and the working voltage is 2V-6V. Both 74LS04 and 74HC04 are inverters, but LS stands for low-power Schottky and HC is high-speed COMS. LS is slightly faster than HC. LS adopts TTL level.
What gate is 74LS04?
The 74LS04 is a Hex Inverter (NOT gate) IC, i.e. it has six NOT gates inside it and each gate has one input and one output pin. All six NOT gates are powered with a common rail but can operate independently.
How many inputs are in a 74LS04 IC?
Logic IC, Inverter, Hex, 1 Inputs, 14 Pins, DIP, 74LS04.
How many inverters are in the 74LS04 IC?
These devices contain six independent inverters.
What is a 74LS04 TTL hex inverter IC?
74LS04 Hex Inverter is a member of the 74XXYY IC series. The 74-series are digital logic integrated circuits, It includes six independent inverse HEX gates. Each gate consists of an input and an output. The reverse phase is one of its main functions.
What is LM358 IC used for?
LM358 can be used as transducer amplifier, DC gain block etc. It has large dc voltage gain of 100dB. This IC can be operated on wide range of power supply from 3V to 32V for single power supply or from ±1.5V to ±16V for dual power supply and it also support large output voltage swing.
What is the function of pin 7 in 74LS04 TTL IC?
| PINS | DETAIL | |
|---|---|---|
| 3A | Pin 5 | Pin 5 will be used as the input for the third inverter. |
| 3Y | Pin 6 | Pin 6 will give the output of the third inverter. |
| GND | Pin 7 | Pin 7 will be used as a common ground pin when IC will be used with other IC. |
| 4Y | Pin 8 | Pin 8 will give the output of the fourth inverter. |
What is LS and HC in IC?
HC stands for high speed CMOS, LS stands for low power schottky, a bipolar technology. In CMOS vs bipolar (TTL) there are threshold differences that were incompatible. Both were from a speed generation that could get you at least 20–30 MHz switching, maybe more.
How many gates does 7408 have?
The 7408 is a QUAD 2-Input AND gates and contains four independent gates each of which performs the logic AND function.
Why EXO are gate is called an inverter?
Why XOR gate is called an inverter? Explanation: The XOR (Exclusive Or) gate has a true output when the two inputs are different. When one input is true, the output is the inversion of the other. When one input is false, the output is the non-inversion of the other.
What is the maximum free air operating temperature Ta for 74LS04?
| Supply Voltage | 7V |
|---|---|
| Input Voltage | 5.5V |
| Operating Free Air Temperature | 0°C to +70°C |
| Storage Temperature Range | -65°C to +150°C |
Why does IC start with 74?
Two digits, where "74" denotes a commercial temperature range device and "54" denotes a military temperature range. Historically, "64" denoted a short-lived series with an intermediate "industrial" temperature range.
What is a 7404 chip?
The IC 7404 chip is a typical logic INVERTER chip that comes with six independent gates. This chip has an operating voltage of 5V. This means that the minimum operating voltage is 4.75V and the maximum is 5.25V.
Who is the top leading manufacturer of integrated circuits?
| Company | Headquartered | |
|---|---|---|
| 1 | Texas Instruments | United States |
| 2 | Analog Devices | United States |
| 3 | Skyworks Solutions | United States |
| 4 | Infineon | Germany |
What are the 3 types of inverters?
There are 3 major types of inverters - sine wave (sometimes referred to as a "true" or "pure" sine wave), modified sine wave (actually a modified square wave), and square wave.
How many MOSFETs are used in inverter?
The driving stage has 2 MOSFETs IRF540N and the 230V / 9V-0-9V / 10A transformer boosts the output voltage. The oscilloscope is probed at gate terminal of the both MOSFETs and we get the above waveform which is square wave at around 50Hz and 50% duty cycle.
Which IC is used for and gate?
An AND logic gate IC like 74LS08 includes 4 AND logic gates where each gate is used separately without changing other gates so it is called QUADRUPLE two-input AND logic gates. This IC works with a single power supply but it is available in several packages based on the circuit requirement.
Which is better CMOS or TTL?
Overall CMOS is the clear winner when it comes to utility. The TTL logic family uses bipolar transistors to perform logic functions and CMOS uses field effect transistors. CMOS generally consumes much less power, despite being more sensitive than TTL.
What is a TTL inverter?
The schematic of a Transistor Transistor Logic (TTL) inverter is shown in figure 1. This circuit overcomes the limitations of the single transistor inverter circuit. The basic TTL inverter consists of three stages. A current steering input, a phase splitting stage and an output driver stage.
Post a Comment for "74ls04"